Tib Four Kwarz
Tib Kwarz tro gro
Bato Kwarz
plak kwars
port lalanp kwars
Baton Kwarz
bag kwars
bann prodwi kwarz personnalize
bann prodwi so
0102030405
Lasin bann fourniser Lasin Factory Fused Silica Quartz Plate - Rezistan Lasaler, O Pirte, Bann Groser Personnalize Disponib
| 📐longer × larzer (mm) | 🔲Tolerans Dimansyonnel (mm) | 📏epeser standar (mm) | 🔧Tolerans Lepeser (mm) |
|---|---|---|---|
| 10 × 10 | ±0.1 | 0.5 / 1.0 / 2.0 | ±0.05 ~ ±0.1 |
| 20 × 20 | ±0.1 | 0.5 / 1.0 / 2.0 / 3.0 | ±0.05 ~ ±0.1 |
| 30 × 30 | ±0.1 | 1.0 / 2.0 / 3.0 | ±0.05 ~ ±0.1 |
| 40 × 40 | ±0.1 ~ ±0.2 | 1.0 / 2.0 / 3.0 / 4.0 | ±0.08 ~ ±0.1 |
| 50 × 50 | ±0.1 ~ ±0.2 | 1.0 / 2.0 / 3.0 / 5.0 | ±0.08 ~ ±0.1 |
| 60 × 60 | ±0.2 | 2.0 / 3.0 / 5.0 | ±0.1 |
| 80 × 80 | ±0.2 | 2.0 / 3.0 / 5.0 | ±0.1 |
| 100 × 100 | ±0.2 ~ ±0.3 | 2.0 / 3.0 / 5.0 | ±0.1 |
| 150 × 150 | ±0.3 | 3.0 / 5.0 | ±0.1 ~ ±0.2 |
| 200 × 200 | ±0.3 ~ ±0.5 | 3.0 / 5.0 | ±0.1 ~ ±0.2 |
❓ Kestyon ki ganny demande souvan
Q ki tolerans dimansyonnel i vedir dan sa latab spesifikasyon?
EN tolerans dimansyonnel i refer avek devyasyon ki ganny permet avek bann mezir longer ek larzer spesifye. par egzanp, en tolerans ±0.1 mm i vedir ki dimansyon aktyel i kapab 0.1 mm pli gran ou pli pti ki groser ki'n ganny endike, asire ki bann pyes i tonm dan bann limit enzenyer akseptab.
Q akoz bann pli gran groser i annan pli gran tolerans dimansyonnel?
EN Anmezir ki groser en parti i ogmante, mentenir menm presizyon absoli i vin pli difisil akoz lagrandisman materyo, limitasyon masin, e bann varyasyon fabrikasyon kimilatif. bann pli gro morso tel ki 150×150 milimet ou 200×200 milimet i alor annan en pli gran ranze tolerans ±0.3 a ±0.5 milimet.
Q Ki bann opsyon groser ki disponib pou en lepeser standar 5.0 milimet?
EN en lepeser standar 5.0 milimet i disponib pou bann groser 50×50 milimet, 60×60 milimet, 80×80 milimet, 100×100 milimet, 150×150 milimet, e 200×200 milimet. bann pli pti groser tel ki 10×10 milimet e 20×20 milimet pa siport opsyon 5.0 milimet lepeser.
Q ki opsyon pli mens ki disponib e pou ki groser i ganny ofer?
EN lepeser standar pli mens i 0.5 milimet, ki disponib pou bann pli pti groser: 10×10 milimet e 20×20 milimet. sa opsyon tre mens i apropriye pou bann aplikasyon ki demann en volim materyo minim anmenmtan ki i mentenir en kontrol dimansyonnel presi.
Q ki mannyer tolerans lepeser i sanze anmezir ki groser parti i ogmante?
EN Pour bann pli pti groser (10×10 a 50×50 mm), tolerans lepeser i varye depi ±0.05 a ±0.1 mm, ki ofer en kontrol pli sere. Pour bann groser mwayen (60×60 a 100×100 milimet), tolerans i en ±0.1 milimet konsistan. Pour bann pli gran groser (150×150 e 200×200 milimet), tolerans i elarzi ziska ±0.1 ~ ±0.2 milimet.
Q eski bann groser oubyen lepeser personnalize an deor bann spesifikasyon standar i kapab ganny demande?
EN latab anler i liste bann groser ek lepeser standar ki disponib. Pour bann dimansyon personnalize oubyen bann legzizans tolerans spesyal ki al pli lwen ki bann spesifikasyon ki'n ganny liste, i rekomande pour kontakte fabrikan oubyen fourniser direkteman pour diskit fezabilite, dele letan, e okenn legzizans enzenyer adisyonnel.